Troubleshooting Your FROG Leap
If you are you using the FROG Leap system and keep getting zero for your chlorine reading, don’t panic—it’s usually something simple. Here’s a quick troubleshooting guide to get things back on track.
- Check the Torpedo Pac
- Start with the basics. If your Torpedo Pac is empty (or nearly empty), your system can’t produce any sanitizer. Swap it out if needed.
- Start with the basics. If your Torpedo Pac is empty (or nearly empty), your system can’t produce any sanitizer. Swap it out if needed.
- Verify the Infuzer Setting
- Make sure your Infuzer is set to the proper setting for your pool size. If its set too low, it won’t release enough chlorine to maintain a residual.
- Test Your Stabilizer
- Low cyanuric acid can cause chlorine to burn off quickly, especially in sunny conditions. Ensure your levels are in the recommended range so your chlorine can actually stick around.
- Shock the Pool at Night
- If everything checks out and you’re still at zero chlorine, try shocking your pool after the sun goes down. This gives your water a boost in free chlorine and eliminates anything that might be consuming it.
A zero chlorine reading doesn’t always mean your system isn’t working, it usually just needs a small adjustment. If you’re still stuck, give us a call at 803-203-1322 or bring in a water sample and we’ll help you dial it in.
